Home Contact Shopping Cart   Site Map

Unlimited applications,  Long range 
Two (2) channel  supervised wireless control system


Click on the picture for wiring information

   3 Miles ( 5 km )     Application dossier
  Optional extended range up to10 Miles (16Km)


Operating Voltage: 12 VDC
Operating Temperature: -4 to +140 F (-20 to +60 C)
Number of Codes: 4096 codes, factory preset 16 BIT Digital
Compliance: FCC CFR part 15.247,  95 sub E
Transmission Power per FCC Part 15.249,  50mV/m @ 3m
Carrier Frequency 433 MHz, industrial ISM band Free
Current Transmitter Standby 100 mA, transmitting 600mA 
Current  Receiver Standby120 mA, operation, 500mA
Data Input TX CH 1, 2  Dry contact   N/O  Normally Open
Relay Output 1  SPST 10Amp max, 240V max  Class 2 pilot duty
Antenna Impedance 50 Ohms  
Dimensions: 18"H x 16"W x 8"D (460 x 400 x 200 mm)
Weight 8 lb. (4.4 Kg) each
Enclosure NEMA4 IP65 Fiber,  wall or pole mount
MIL-STD 461E for Electro-Magnetic Interference (EMI)
Circuit board Compliance with UL796 and UL 94
  Operating Modes  Transmitter Receiver
 Continuous or
Close switch Ch 1
Close switch Ch 2
Turn ON:
Turn OFF

Transmitter & Receiver easy to install components:
 # 937212

One  Base Transmitter Two dry contact input  
One  Base Receiver Relay output SPDT
Two Yagi  Antennas 938432 with 10ft coaxial cable 
NEMA 4 Fiber enclosure for wall or pole mount
Instructions & wiring diagram

937212T: Solar transmitter NEMA4 Fiber enclosure 16x14x8 inches,
One 50W, 12V solar panel with, charge controller
Enclosure with space for 100Ah battery, NOT Included
*Matched Factory Set,  No Field programming required

Optional  Remote Level status indicator  ( High - Low)
Optional  Transmitter  Low battery alarm at the receiver

  Special order   Please Request latest price


Antenna Selection

DISCLAIMER:  Radio control equipment in not to be used in life safety.
Radio control systems are subject to applications, environmental and atmospheric conditions,
We are not liable of failures on miss applications, radio black outs or interruption of the transmissions. 
Radio Installations shall be performed by a certified professional.

     Copyright   Electrodepot. All rights reserved