Wireless Controls and Automation
   
 

Industrial Wireless Radio Controls
 

 
 
Please Request latest price

  Performance

5 miles ( 8 km) line-of-sight w Omni antenna
 Extended range up to 20 km
Operation:  120/240VAC or 12VDC
Transmitter input N/O Dry contact
Receiver with signal strength indicator
Relay Output SPDT, 6A Class 2 pilot duty
Heavy Duty NEMA4, IP65 UL Fiber enclosure
License free 154MHz Industrial MURS band
Factory configured systems, Ready to operate
No setup or programming required


Operation: Example

If Low Level SW Close: ,  Pump Start.
If High Level SW Close: ,  Pump Stop.


     Optional Float Switches 93650
   

 

   Remote operation for: Pumps, Lighting, Process, Alarms, Gates, Valves.
 
Applications:

Industrial Monitoring, Pump control, Monitor remote sites, Tank Level,
Lighting control, Remote Mobile system, PLC remote, SCADA, Gates.
Factory process control,  Alarms, Generators
Solar,  Wire replacement.

 
■  915428  
   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  7watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 6.8 lb (3.40kg)  each unit
(*) Dimensions  12"W x 10"H x 6"D (300 x 250 x 150 mm)

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay  6Amp, Class 2 pilot duty
Frequency 154MHz  • License free MURS band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, IP65 
(*) Final Component layout and Dimension may vary

Complete system:

One Transmitter 2 Ch in NEM4 Enclosure
One Receiver
in NEM4 Enclosure
Two Omni Antennas 931487
  Antenna Selection


             Typical wiring application example
 


 

 

 

DISCLAIMER: 
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.

 

     Copyright   Electrodepot. All rights reserved